Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T16:37:08.690Z Has data issue: false hasContentIssue false

Mapping Residual-Stress Distributions in a Laser-Peened Vit-105 Bulk-Metallic Glass Using the Focused-Ion-Beam Micro-Slitting Method

Published online by Cambridge University Press:  11 March 2011

B. Winiarski
Affiliation:
School of Materials, The University of Manchester, Grosvenor St., Manchester, M1 7HS, UK
G. Wang
Affiliation:
Dept. of Materials Sci. & Eng., The University of Tennessee, Knoxville, TN 37996, USA
X. Xie
Affiliation:
Dept. of Materials Sci. & Eng., The University of Tennessee, Knoxville, TN 37996, USA
Y. Cao
Affiliation:
School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA
Y. Shin
Affiliation:
School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907, USA
P. K. Liaw
Affiliation:
Dept. of Materials Sci. & Eng., The University of Tennessee, Knoxville, TN 37996, USA
P. J. Withers
Affiliation:
School of Materials, The University of Manchester, Grosvenor St., Manchester, M1 7HS, UK
Get access

Abstract

Measuring residual-stresses at the micron scale in glassy materials imposes experimental challenges, particularly when using diffraction, or other conventional laboratory methods, e.g., optical non-contact methods, grid methods, etc. In this short paper, a technique for mapping residual-stress profiles in amorphous materials with high spatial definition is used to measure residual-stresses in a laser-peened and fatigued bulk-metallic glass - Vit-105. The method involves local deposition of nano Pt dots patterns on the mapped region of the specimen and milling of a series of micro-slots of size 15 × 2 × 0.4 μm3 using the focused ion beam of a dual beam Field Emission Gun Scanning Electron Microscope / Focused Ion Gun (FEGSEM/FIB) instrument. The deformation fields in the vicinity of slots are reconstructed by the digital image correlation analyses (DICA) of FEGSEM images recorded during milling. The residual-stresses are inferred by fitting a reference displacement field obtained from finite-element analyses (FEA) with the recorded displacement field. In this way, residual-stress distributions have been characterized as a function of the distance from the laser-peened surface to a depth of 1,200 microns with a spatial resolution of 30 μm. The influence of fatigue loading on the compressive residual-stresses spatial distribution is studied and discussed. It was found that the fatigue loading significantly changes the compressive residual-stress spatial distribution in the laser-peened layer.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable