Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T09:25:46.427Z Has data issue: false hasContentIssue false

Measuring Local Mechanical Properties using FIB Machined Cantilevers

Published online by Cambridge University Press:  31 January 2011

David Edward John Armstrong
Affiliation:
david.armstrong@materials.ox.ac.uk, University of Oxford, Department of Materials, Oxford, United Kingdom
Angus Jonathan Wilkinson
Affiliation:
angus.wilkinson@materials.ox.ac.uk, University of Oxford, Department of Materials, Oxford, United Kingdom
Steve George Roberts
Affiliation:
steve.roberts@materials.ox.ac.uk, University of Oxford, Department of Materials, Oxford, United Kingdom
Get access

Abstract

Micro-scale Focused Ion Beam (FIB) machined cantilevers were manufactured in single crystal copper, polycrystalline copper and a copper-bismuth alloy. These were imaged and tested in bending using a nanoindenter. Cantilevers machined inside a single grain of polycrystalline copper were tested to determine their (anisotropic) Young's modulus: results were in good agreement with values calculated from literature values for single crystal elastic constants. The size dependence of yield behavior in the Cu microcantilevers was also investigated. As the thickness of the specimen was reduced from 23μm to 1.7μm the yield stress increased from 300MPa to 900MPa. Microcantilevers in Cu-0.02%Bi were manufactured containing a single grain boundary of known character, with a FIB-machined sharp notch on the grain boundary. The cantilevers were loaded to fracture allowing the fracture toughness of grain boundaries of different misorientations to be determined.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable