Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T18:02:14.454Z Has data issue: false hasContentIssue false

Mechanical Behavior Of Energetic Materials During High Acceleration

Published online by Cambridge University Press:  11 February 2011

Y. Lanzerotti
Affiliation:
U. S. Army TACOM ARDEC Picatinny Arsenal, NJ 07806 5000
J. Sharma
Affiliation:
Naval Surface Warfare Center, Carderock Division Silver Spring, MD 20903
Get access

Abstract

The mechanical behavior of explosives subjected to high acceleration has been studied in an ultracentrifuge at –10°C and 25°C. Melt-cast TNAZ and pressed TNAZ, LX-14, Composition A3 Type II, PAX-2A, and PAX-3 have been studied. Failure occurs when the shear or tensile strength of the explosive is exceeded. The fracture acceleration of melt-cast TNAZ is greater than that of pressed TNAZ at –10°C and 25°C. The fracture acceleration of PAX-3 is greater than that of Composition A3 Type II at –10°C and 25°C. The fracture acceleration of melt-cast TNAZ and pressed TNAZ at –10°C is about 10% less than at 25°C. The fracture acceleration of PAX-3 at –10°C is about 2.6 times that at 25°C. The fracture acceleration of Composition A3 Type II at –10°C is about 1.7 times that at 25°C.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable