Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T12:42:59.215Z Has data issue: false hasContentIssue false

Mechanical Behavior of Intercalated Polycarbonate Layered-Silicate Nanocomposites

Published online by Cambridge University Press:  01 February 2011

Alex J. Hsieh
Affiliation:
U.S. Amy Research Laboratory, Polymers Research Branch, AMSRL-WM-MA, Aberdeen Proving Ground, MD 21005-5069.
Donovan Harris
Affiliation:
U.S. Amy Research Laboratory, Polymers Research Branch, AMSRL-WM-MA, Aberdeen Proving Ground, MD 21005-5069.
Paul Moy
Affiliation:
U.S. Amy Research Laboratory, Polymers Research Branch, AMSRL-WM-MA, Aberdeen Proving Ground, MD 21005-5069.
John W. Song
Affiliation:
U.S. Army Natick Soldier Center, AMSSB-RIP-B(N), Natick, MA 01760-5019.
Get access

Abstract

The effect of layered-silicates on the mechanical response of intercalated polycarbonate (PC) nanocomposites subjected to quasi-static tensile, compressive and ballistic impact testing conditions has been investigated. These nanocomposites were melt-processed, in which good dispersion of nanoclays and adequate adhesive bonding between the nanoclay and PC matrix are achieved. However, their ductility upon tensile loading is significantly affected; a transition from ductile to brittle deformation occurs at clay loading of about 3 wt.%. Stress whitening is evident in the tensile- and ballistic-tested 1.5, 2.5, and 3.5 wt.% clay nanocomposites, and is attributed to the light scattering by microvoids, which are presumably formed from either crazing of PC or debonding of the nanoclay tactoids upon mechanical deformation. The effect of clay loading on the ballistic impact strength of the monolithic PC nanocomposites and layered PC/PC-nano/PC composites is determined. Compressive yield strength measurements are obtained at strain rate of 0.001/s for the monolithic PC nanocomposites and are utilized to correlate with the ballistic impact strength of the layered PC/PC-nano/PC composites. Thermal degradation is noted in these PC nanocomposites, and its effect on the mechanical deformation is briefly discussed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable