Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T22:48:34.999Z Has data issue: false hasContentIssue false

Mechanical Behavior of Molybdenum Disilicide-Based Alloys

Published online by Cambridge University Press:  21 March 2011

A. Misra
Affiliation:
MST Division, Los Alamos National Laboratory, Los Alamos, NM 87545
A.A. Sharif
Affiliation:
MST Division, Los Alamos National Laboratory, Los Alamos, NM 87545
J. J. Petrovic
Affiliation:
MST Division, Los Alamos National Laboratory, Los Alamos, NM 87545
T. E. Mitchell
Affiliation:
MST Division, Los Alamos National Laboratory, Los Alamos, NM 87545
Get access

Abstract

We have investigated the mechanical behavior of the following single-phase polycrystalline alloys with the MoSi2 body-center tetragonal structure: MoSi2 alloyed with ∼2.5 at.% Re, MoSi2 alloyed with 2 at.% Al, MoSi2 alloyed with 1 at.% Nb, and MoSi2 alloyed with 1 at.% Re and 2 at.% Al. Several anomalies in the mechanical behavior of alloyed materials were observed. For example, (i) addition of only ∼2.5 at. % Re results in an order of magnitude increase in compressive strength at 1600 °C, (ii) additions of Nb and Al cause solution softening at near-ambient temperatures, and (iii) quaternary MoSi2-Re-Al alloys show strengthening at elevated temperatures and reduction in flow stress with enhanced plasticity at near-ambient temperatures in compression. The mechanisms of anomalous solution hardening and softening are discussed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable