Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T11:36:58.041Z Has data issue: false hasContentIssue false

Mechanical Properties of Laser Processed Diamond-Like Carbon Films

Published online by Cambridge University Press:  15 February 2011

Ashok Kumar
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36688
R. B. Inturi
Affiliation:
Department of Metallurgical and Materials Engineering, University of Alabama, Tuscaloosa, AL 35487-0202
Y. Vohra
Affiliation:
Department of Physics, University of Alabama at Birmingham, Birmingham, AL 35294- 1170
U. Ekanayake
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36688
N. Shu
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36688
D. Kjendal
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36688
G. Wattuhewa
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36688
J. A. Barnard
Affiliation:
Department of Metallurgical and Materials Engineering, University of Alabama, Tuscaloosa, AL 35487-0202
Get access

Abstract

Diamond-like carbon (DLC) films have a unique combination of physical and chemical properties such as high hardness, optical transparency, low coefficient of friction and chemical inertness. A pulsed laser (248 nm) has been used to ablate a pyrolytic graphite target to deposit DLC films on Si (100) and 7059 Corning glass substrates. The deposition was carried out in high vacuum (≤ 10−6 Torr) at different temperatures ranging from room temperature to 400°C. The films were characterized by x-ray diffraction, scanning electron microscope, and Raman spectroscopie techniques. The mechanical properties (hardness and Young's modulus) of these films were characterized by nanoindentation. We have found that the films deposited at room temperature and 100°C show the characteristic features of DLC films and have the better hardness and modulus properties compared to the films fabricated at higher temperatures, which transform into amorphous carbon. Correlations of pulsed laser deposition process parameters with the properties of deposited DLC films will be discussed in this paper.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable