Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-15T20:40:59.203Z Has data issue: false hasContentIssue false

Metallographic Structure and Mechanical Properties in Vanadium Modified Titanium Trialuminides

Published online by Cambridge University Press:  01 January 1992

Tohru Takahashi
Affiliation:
Department of Mechanical Systems Engineering, Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184, JAPAN
Katuyuki Endo
Affiliation:
Department of Mechanical Systems Engineering, Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184, JAPANSEIKO EPSON Corp., Okaya, JAPAN
Susumu Kaizu
Affiliation:
Graduate School, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184, JAPANNKK Corp., Kawasaki, JAPAN
Tadashi Hasegawa
Affiliation:
Department of Mechanical Systems Engineering, Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184, JAPAN
Get access

Abstract

Two types of aluminum-titanium-vanadium ternary intermetallic compounds have been prepared by arc melting under argon atmosphere. Their compositions were nominally AI65Ti25V10 and Al57 Ti 22V21; the numbers represent the molar fractions in mol%. These two alloys stand within the gamma-phase field where the L10 face-centered tetragonal structure is produced. Metallographic structure and mechanical properties have been investigated. It is suggested that vanadium addition to titanium aluminides and titanium trialuminides can enhance their strength.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable