Hostname: page-component-7b7567c8c-slfcl Total loading time: 0 Render date: 2026-11-19T16:01:12.413Z Has data issue: false hasContentIssue false

Micromechanical Simulations on Hygro-Mechanical Properties of Bio-fiber Plastic Composites

Published online by Cambridge University Press:  01 February 2011

Yibin Xue
Affiliation:
axue@cavs.msstate.edu, Mississippi State University, Center for Advanced Vehicular Systerms, 124 Northgate Dr., Starkville, MS, 39759, United States
Kunpeng Wang
Affiliation:
kpwang@student.dlut.edu.cn, Dalian University of Technology, Dalian, N/A, China, People's Republic of
Get access

Abstract

The hygro-mechanical properties of bio-fiber composites comprise two aspects: the coupling between moisture diffusion and mechanical deformations and the coupling of moisture contents and the constitutive behaviors. Bio-fiber is hydrophilic, which absorbs water promptly when environmental moisture content increases; as the moisture content in the fiber increases, its mechanical properties decrease. This paper presents a series ofmicromechanical simulations to predict the hygro-mechanical behaviors of woodfiber-reinforced plastic composites considering the effects of fiber arrangements on the stress-strain relations and moisture-expansions on three progressively constructed constitutive configurations: 1) the fiber is elastic orthotropic and expandable under moisture variations; the plastic matrix is elastic isotropic and insensitive to environmental moisture variations, and the interface between fiber and matrix is perfectly bounded; 2) the plastic matrix is hyperelastic and expresses a certain degree of damage as deformation progresses; and 3) the interface has a pseudo adhesive layer that obeys Smith and Ferrante's universal binding law implemented as a cohesive zone model in the micromechanical simulation. In configuration II, micromechanical simulations demonstrate significant reductions in the nominal elastic modulus of composites when a nonlinear elastic model for the polymer matrix is assumed. The prediction for stress-strain relationship is found to be comparable to the experimental measurements. A cohesive model in configuration III is introduced to evaluate the possible moisture degradation to the fiber-matrix interface, which results in a reduction in elastic modulus and failure strength of the composite s, as observed in experiments. The cohesive zone model parameters as a function of moisture content in the composites requires more attention in model correlation and guarantee more direct experimental observations.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable