Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T23:42:25.257Z Has data issue: false hasContentIssue false

Microstructural Development of Mo(ss) + T2 Two-Phase Alloys

Published online by Cambridge University Press:  10 February 2011

R. Sakidja
Affiliation:
Dept. of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Ave., Madison, WI 53706
G. Wilde
Affiliation:
Dept. of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Ave., Madison, WI 53706
H. Sieber
Affiliation:
Dept. of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Ave., Madison, WI 53706
J. H. Perepezko
Affiliation:
Dept. of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Ave., Madison, WI 53706
Get access

Abstract

The microstructure evolution involving Mo-B-Si as-solidified alloys with compositions in the Mo solid-solution(ss) + T2 two-phase field has been examined following arc-melting and rapid solidification processing (RSP). Several solidification pathways in the arc-melted alloys have been identified. Compositional segregation during conventional solidification results in the formation of additional phases such as borides in the arc-melted alloys which require a prolonged solid-state annealing to obtain equilibrated two-phase microstructures. The RSP methods employed, splat-quenching (SQ) and powder drop tube processing (DTP), allow for significant microstructural modifications that facilitate the attainment of uniform dispersions of Mo(ss) phase in a T2 phase matrix.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable