Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T06:49:17.306Z Has data issue: false hasContentIssue false

Microstructural Development of TiB2 Ion Implanted with 1 Mev Nickel*

Published online by Cambridge University Press:  25 February 2011

P. S. Sklad
Affiliation:
Metals and Ceramics Division Oak Ridge National Laboratory, Post Office Box X, Oak Ridge, TN 37831
P. Angelini
Affiliation:
Metals and Ceramics Division Oak Ridge National Laboratory, Post Office Box X, Oak Ridge, TN 37831
M. B. Lewis
Affiliation:
Metals and Ceramics Division Oak Ridge National Laboratory, Post Office Box X, Oak Ridge, TN 37831
C. J. Mchargue
Affiliation:
Metals and Ceramics Division Oak Ridge National Laboratory, Post Office Box X, Oak Ridge, TN 37831
Get access

Abstract

An Analytical Electron Microscopy (AEM) investigation of polycrystalline TiB2 implanted with 1 MeV Ni+ to 1 × 1021 ions/m2 has shown that the implanted region remained crystalline and showed no evidence of precipitation. A region containing tangled dislocations extended from the implanted surface to ∼500 nm. Between ∼500 and 750 nm, the microstructure was more complicated and could be indicative of a high density of 5 to 10 nm diam defects. The maximum nickel concentration determined by energy dispersive spectroscopy (EDS) occurred at ∼450 nm, slightly deeper than the calculated depth of 390 nm. Observations after in situ annealing revealed cavities and nickel-rich precipitates. Radiation damage models are invoked to explain the microstructures observed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable