Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T12:26:55.195Z Has data issue: false hasContentIssue false

Microstructural Features and Shape-Memory Characteristics of Melt-Spun Ni-Al-Fe-B Ribbons

Published online by Cambridge University Press:  25 February 2011

C. T. Liu
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831–6115
C. J. Sparks
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831–6115
J. A. Horton
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831–6115
E. P. George
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831–6115
C. A. Carmichael
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831–6115
Ming-Yuan Kao
Affiliation:
Johnson Controls Corporation, Milwaukee, WI
Henry Kunsmann
Affiliation:
Eaton Corporation, Milwaukee, WI
Get access

Abstract

This paper summarizes our recent study of NiAI+Fe+B alloy ribbons containing 4 to 20% Fe and doped with 300 wt ppm B. Alloy ribbons were successfully fabricated by rapid solidification via melt spinning. The alloys with 8% Fe and 34% Al-equivalent [=Al%+(Fe%)/2] showed the best bend ductility at room temperature. The ribbons exhibited a reversible martensite (body-centered orthorombic structure) to B2 transformation as evidenced by DSC, X-ray and TEM studies. The shape-memory effect, as characterized by measuring the recovery of bend angles with temperature, is sensitive to alloy composition, with the best recovery observed in SMA-15 (B-doped Ni-27% Al-14% Fe). Annealing at 600°C causes aging embrittlement; in particular, in alloys containing 12% Fe.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable