Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T18:32:26.362Z Has data issue: false hasContentIssue false

Microstructure and Composition of Synroc Samples Crystallized From a CaCeTi2O7 Chemical System: HRTEM/EELS Investigation

Published online by Cambridge University Press:  10 February 2011

Huifang Xu
Affiliation:
Transmission Electron Microscopy Laboratory, Department of Earth and Planetary Sciences, The University of New Mexico, Albuquerque, New Mexico 87131. E-mail: hfxu@unm.edu
Yifeng Wang
Affiliation:
Sandia National Laboratories, 115 North Main Street, Carlsbad, New Mexico 88220 E-mail: ywang@sandia.gov
Robert L. Putnam
Affiliation:
Los Alamos National Laboratory, Los Alamos, New Mexico 87545
Jose Gutierriez
Affiliation:
Dept. of Chemical Engineering and Materials Science, University of California at Davis, One Shields Avenue, Davis, CA 95616-8779
Alexandra Navrosky
Affiliation:
Dept. of Chemical Engineering and Materials Science, University of California at Davis, One Shields Avenue, Davis, CA 95616-8779
Get access

Abstract

Ce-pyrochlore, CaCeTi2O7 is a chemical analogue for CaPuTi2O7, which is a proposed ceramic endmember waste form for the disposition of excess weapon-usable plutonium in geological repositories. Ce-pyrochlore was synthesized by firing and annealing in air a mixture of CeO2, TiO2, and CaCO3 with a stoichiometry of CaCeTi2O7. The annealed products contain Cepyrochlore, Ce-bearing perovskite, CeO2, and minor CaO. The mixture annealed at a temperature of 1140 °C contains more pyrochlore phase than that annealed at a higher temperature (1300 °C), indicating that a low temperature condition favors the formation of the Ce-pyrochlore. The Ca/Ce ratio of the pyrochlore is slightly lower than the ideal ratio (one). Electron energy-loss spectroscopy results show that there is a small fraction of Ce3+ present in the pyrochlore. Ce present in perovskite is dominated by Ce3. High-resolution TEM images show that the boundary between pyrochlore and perovskite is semi-coherent. No glassy phases were observed at the grain boundary between pyrochlore and perovskite, nor between CeO2and pyrochlore. It is postulated, based on the presence of trivalent Ce in the Ce-pyrochlore, that neutron poisons such as trivalent cation Gd would be incorporated into the CaPuTi2O7 phase

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable