Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T07:43:09.113Z Has data issue: false hasContentIssue false

Microstructure and Residual Stresses in Al2O3 Prepared by Ion Beam Assisted Deposition

Published online by Cambridge University Press:  22 February 2011

M. G. Goldiner
Affiliation:
Department of Nuclear Engineering, University of Michigan, Ann Arbor, MI 48109
G. S. Was
Affiliation:
Department of Nuclear Engineering, University of Michigan, Ann Arbor, MI 48109
L. J. Parfitt
Affiliation:
Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109
J. W. Jones
Affiliation:
Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109
Get access

Abstract

Alumina films synthesized by ion beam assisted deposition (EBAD) were characterized in terms of their microstructure and residual stress. Normalized energy per deposited atom, En, ranged from 0 to 130 eV/atom. The microstructure of PVD films (En=0) is a mixture of crystalline (γ-Al2O3) and amorphous phases and IBAD films are amorphous. Density and stoichiometry vary between 2.6 and 3.1 g/cm3 and 1.3 and 1.6, respectively. Neither are dependent on either ion-to-atom arrival rate ratio, R, or En. The film porosity is in the form of small (4-6 nm) voids of density 1017 - 1018 cm-3. Bombarding gas is incorporated with 80% efficiency to levels of 4-5 at. %. A tensile residual stress of 0.3 GPa exists in PVD films. A rapid transition to high compressive stresses occurs with increased En, with a saturation of -0.4 GPa occurring at high En There is a strong correlation between gas incorporation and residual film stress. However, no existing models are capable of providing a quantitative explanation of the results.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable