Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T21:08:37.681Z Has data issue: false hasContentIssue false

Microstructure of Zr3Al After 2 MeV Proton Bombardment

Published online by Cambridge University Press:  25 February 2011

A. J. Ardell
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90024
D. F. Pedraza
Affiliation:
Metals and Ceramics Division, P. O. Box 2008, Oak Ridge National Laboratory, Oak Ridge, TN 37831
R. A. Buhl
Affiliation:
Metals and Ceramics Division, P. O. Box 2008, Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

The ordered intermetallic Ll2 alloy Zr3Al was irradiated with 2 MeV protons at -124 °C to fluences up to 2 × 1015 H+/mm2 and at 250 °C to fluences up to 1 × 1015 H+/mm2. Defects with spherically symmetric strain fields were produced at both irradiation temperatures. They are of interstitial character at -124 °C and vacancy character at 250 °C. Disordering is induced at -124 °C, whereas irradiating at 250 °C initially lowers, then slightly raises, the degree of long-range order above its unirradiated value. Additional defects that appear as black spots were imaged using superlattice reflections in dark field. For the low-temperature irradiations they were seen at all doses, but were present at only the lowest close for the high-temperature irradiations. They are probably disordered zones, although some of the zones may be amorphous at the higher doses in the low-temperature irradiations.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable