Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T11:36:14.504Z Has data issue: false hasContentIssue false

Microstructures and Mechanical Properties of MoSi2 / Mo5Si3 / Mo5Si3C Ternary Eutectic Composite

Published online by Cambridge University Press:  12 February 2015

Hirotaka Matsunoshita
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Kosuke Fujiwara
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Yuta Sasai
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Yuichiro Kondo
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Kyosuke Kishida
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, JapanCenter for Elements Strategy Initiative for Structural Materials (ESISM), Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Haruyuki Inui
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, JapanCenter for Elements Strategy Initiative for Structural Materials (ESISM), Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Get access

Abstract

Microstructures and mechanical properties of directionally solidified (DS) MoSi2 / Mo5Si3 / Mo5Si3C ternary eutectic composites were investigated. Ternary eutectic microstructure of a script-lamellar type that is characterized by rod-shaped Mo5Si3 and Mo5Si3C phases extending along the growth direction in the MoSi2 single crystalline matrix was developed simply by directional solidification at a growth rate of 10 mm/h. Compression tests along $[{\rm{1}}\mathop 1\limits^- 0]_{MoSi_2 }$ nearly parallel to the growth direction revealed that the DS ternary eutectic composites were plastically deformed above 1000 °C. Yield stresses of the DS ternary eutectic composites were much higher than those of binary composites mainly because of a smaller average thickness of MoSi2 matrix.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable