Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T14:01:27.932Z Has data issue: false hasContentIssue false
  • English
  • Français

Microwave Processing of Redox Ceramic-Metal Composites

Published online by Cambridge University Press:  10 February 2011

R. R. Di Fiore and
D. E. Clark
R. R. Di Fiore
Affiliation:
University of Florida, Gainesville, FL 32611, RFIOR@MSE.UFL.EDU
D. E. Clark
Affiliation:
University of Florida, Gainesville, FL 32611, RFIOR@MSE.UFL.EDU
Get access

Abstract

Ceramic-metal composites have been produced through the reduction of copper oxide (CuO) and the oxidation of aluminum in a reducing atmosphere. Fine powders of CuO and Al (<38μm) were mixed with yttria stabilized zirconia, ball milled and uniaxially pressed into disc samples. Microwave hybrid heating was used to process samples using β-SiC and activated carbon powder as susceptors. Pyrolysis of the carbon provided the reducing atmosphere. The resulting Ctt/Al2O3/Y-ZrO2 composite was analyzed for density, compressive strength and resistivity.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 430: Symposium O – Microwave Processing of Materials V , 1996, 101
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Jones, Denny A., Prevention and Protection from Corrosion, Macmillan Publishing Co., New York, (1992).Google Scholar
2. Yiin, T., Barmatz, M., Feng, H. and Moore, J., “Microwave Induced Combustion Synthesis of Ceramic and Ceramic-Metal Composites,” Microwaves: Theory and Application in Materials Processing III, Amer. Cer. Soc., Westerville, OH, pp. 541–547 (1995).Google Scholar
3. Janney, M.A., Calhoun, C.L. and Kimrey, H.D., “Microwave Sintering of Zirconia-8 mol% Yttria,” Microwaves: Theory and Application in Materials Processing 1, Amer. Cer. Soc., Westerville, OH, pp. 311–318 (1991).Google Scholar
4. Cozzi, A.D., Clark, D.E., Ferber, M.K. and Tenney, V.J., “Apparatus for the Joining of Ceramics Using Microwave Hybrid Heating,” Microwaves: Theory and Application in Materials Processing III, Amer. Cer. Soc., Westerville, OH, pp. 389–396 (1995).Google Scholar
5. Hutcheon, R.M., Hayward, P., Smith, B.H. and Alexander, S.B., “High Temperature Measurement - Another Analytical Tool for Ceramic Studies?,” Microwaves: Theory and Application in Materials Processing III, Amer. Cer. Soc., Westerville, OH, pp. 235–242 (1995).Google Scholar
6. Darby, G., Clark, D.E., Fiore, R. Di, Schulz, R., Folz, D., Booyapiwat, A. and Roth, D., “Temperature Measurement During Microwave Processing,” Microwaves: Theory and Application in Materials Processing III, Amer. Cer. Soc., Westerville, OH, pp. 515–522 (1995).Google Scholar
7. Clark, D.E., Ahmad, I. and Dalton, R.C., “Microwave Ignition and Combustion Synthesis of Composites,” Matd. Sci. & Eng., A144, pp. 91–97 (1991).Google Scholar
8. Bescher, E. and Mackenzie, J.D., “Microwave Heating of Cermets,” Microwaves: Theory and Application in Materials Processing I, Amer. Cer. Soc., Westerville, OH, pp. 557–563 (1991).Google Scholar
9. Fiore, R. Di and Clark, D.E., “Microwave Joining of Zinc Sulfide,” Microwaves: Theory and Application in Materials Processing III, Amer. Cer. Soc., Westerville, OH, pp. 381–388 (1995).Google Scholar