Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T16:38:10.596Z Has data issue: false hasContentIssue false

Micro-Wear Technique and its Application to Ultra Thin Film Systems

Published online by Cambridge University Press:  15 February 2011

T.W. Wu
Affiliation:
IBM Research Division, Almaden Research Center, San Jose, CA 95120-6099, U.S.A.
C.-K. Lee
Affiliation:
IBM Research Division, Almaden Research Center, San Jose, CA 95120-6099, U.S.A.
Get access

Abstract

A micro-wear testing technique has been developed by incorporating a piezoelectric pusher into an existing micro-indenter system. The pusher and its associated servo-control circuitry were designed to generate a precise reciprocating horizontal motion at the indenter tip for implementing micro-scaled wear test. The information acquired from the test includes the wear loading curve, i.e., the normal applied load versus wear penetration depth, the friction force and in turn, the apparent wear friction coefficient. Acquiring the electrical resistance across the coating thickness is also possible if an electrical conducting indenter is utilized. Furthermore, in collaboration with the surface characterization tools, the wear morphology revealed useful information regarding the coating failure mechanism(s) and shed some light towards understanding coating tribology. The tester design concepts, operating procedure, data acquisition and analysis will be examined. Experimental results on ultra thin carbon coatings with various thicknesses will be employed to illustrate the capabilities of the microwear tester.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable