Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T08:36:47.080Z Has data issue: false hasContentIssue false

Miniaturized Disk-Bend Testing and Microstructure of 3.8 Mev Zr3+ Irradiated Zr3Al

Published online by Cambridge University Press:  26 February 2011

F. C. Chen
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90024
A. J. Ardell
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90024
D. F. Pedraza
Affiliation:
Metals and Ceramics Division, P. O. Box 2008, Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

The mechanical behavior of Zr3Al irradiated with 3.8 MeV Zr3+, ions has been investigated using a miniaturized disk bend test (MDBT). The samples tested were 3 mm in diameter and either nominally 100 or 250 μ m thick. They were irradiated at 250 °C to peak doses varying from 0.0041 to 2 displacements per atom (dpa). The yield stresses, σy, of the thin specimens were independent of dose, within experimental error, and comparable to that of unirradiated Zr3 Al. However, for the thick specimens σy was significantly larger for the irradiated material, possibly increasing to a maximum at a peak dose between 0.02 and 0.06 dpa. The relative insensitivity of σy of the thin specimens to irradiation, compared to the thick ones, is a surprising result for which we have no satisfactory explanation. Examination by transmission electron microscopy showed that Zr3Al begins to undergo chemical disorder at a dose of only 0.02 dpa and Is nearly completely disordered at 0.41 dpa. Electron diffraction indicates the presence of satellite reflections along 〈110〉 in {001} diffraction patterns. The nature of the defects responsible for these has not yet been determined, although rather similar effects have been observed in electron and Kr+-ion irradiated Zr3Al and attributed to elastic softening of the lattice. The possible roles of these defects, as well as disordering, are discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable