Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-19T04:47:56.417Z Has data issue: false hasContentIssue false

MOCVD of Ir and IrO2 Thin Films for PZT Capacitors

Published online by Cambridge University Press:  21 March 2011

M. Shimizu*
Affiliation:
Department of Electronics, Faculty of Engineering, Himeji Institute of Technology, 2167 Shosha, Himeji, Hyogo 671-2201, Japan
K. Kita
Affiliation:
Department of Electronics, Faculty of Engineering, Himeji Institute of Technology, 2167 Shosha, Himeji, Hyogo 671-2201, Japan
H. Fujisawa
Affiliation:
Department of Electronics, Faculty of Engineering, Himeji Institute of Technology, 2167 Shosha, Himeji, Hyogo 671-2201, Japan
H. Niu
Affiliation:
Department of Electronics, Faculty of Engineering, Himeji Institute of Technology, 2167 Shosha, Himeji, Hyogo 671-2201, Japan
Get access

Abstract

Ir films were prepared on SiO2/Si at 275-500°C by M°CVD (Metalorganic Chemical Vapor Deposition) using a new Ir precursor, Ir(EtCp)(cod) (iridium(ethylcyclopentadienyl) (1,5-cyclo°Ctadiene): Ir(C2H5C5H4)(1,5-C8H12). Ir films prepared at 275-300°C showed highly reflecting surfaces with Rrms roughness (root-mean-square roughness) of 1.4-10nm. At 500°C, Ir and IrO2 mixture-oriented films were grown. Ir films deposited at 300°C on patterned SiO2/Si substrates with aspect ratios of 0.3-2.0 showed good step coverage of 70-85%. Auger analysis revealed that Ir film had no incorporation of carbon and oxygen, and that Ir films performed well as a diffusion barrier in PZT/Ir/SiO2/Si structure.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable