Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T10:27:10.661Z Has data issue: false hasContentIssue false

Modeling of Collimateti Titanium Nitride Physical Vapor Deposition using a Combined Specular-Diffuse Formulation

Published online by Cambridge University Press:  21 February 2011

A. J. Toprac
Affiliation:
SEMATECH, 2706 Montopolis, Austin, TX 78741–6499
B. P. Jones
Affiliation:
SEMATECH, 2706 Montopolis, Austin, TX 78741–6499Also with IBM, East Fishkill, New York
J. Schlueter
Affiliation:
SEMATECH, 2706 Montopolis, Austin, TX 78741–6499
T. S. Cale
Affiliation:
Arizona State University, Tempe, AZ 85287–6006
Get access

Extract

Re-emissions from surfaces receiving a ballistically transported molecular flux have, in the most general case, a spatial distribution with a combination of specular and diffuse components. The addition of specular transmission in the EVOLVE model allows combined specular-diffuse re-emission to be explicitly modeled. Previous modeling of the step-coverage of sputtered titanium nitride (TiN) films in contact structures produced good predictions with a sub-unity sticking coefficient, 0.6 in value, using a strictly diffuse formulation for material re-emission. New data of collimated sputtered TiN with contact aspect ratios exceeding 4.0 was modeled using the EVOLVE specular-diffuse formulation. The result was more accurate model predictions of experimental data and replacement of the ad hoc empirical parameter adjustment in previous modeling with a more detailed physical description.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable