Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T13:44:12.511Z Has data issue: false hasContentIssue false

Modifications Of Preceramic Polymers Suitable For Corrosion Resistant And High Temperature Coatings

Published online by Cambridge University Press:  10 February 2011

Y. D. Blum
Affiliation:
SRI International, 333 Ravenswood Avenue, Menlo Park, CA 94025, yigal.blum@sri.com
H. P. Chen
Affiliation:
SRI International, 333 Ravenswood Avenue, Menlo Park, CA 94025, yigal.blum@sri.com
D. B. Macqueen
Affiliation:
SRI International, 333 Ravenswood Avenue, Menlo Park, CA 94025, yigal.blum@sri.com
S. M. Johnson
Affiliation:
SRI International, 333 Ravenswood Avenue, Menlo Park, CA 94025, yigal.blum@sri.com
Get access

Abstract

Low-cost preceramic polymers have been developed and used for various coating and composite applications. These siloxane-based polymers can be tailored to be precursors to ceramics or remain as polymeric materials. Polyhydridomethylsiloxane (PHMS) serves as the base polymer, and it can be cured or modified by dehydrocoupling or a combination of hydrosilylation-dehydrocoupling reactions, both catalyzed by transition metal catalysts (Pt and Ru). The base polymer filled with various powders is used primarily for thick ceramic coatings. Modified polymers are used for low-temperature paint-like applications, especially where ambient curing is desirable. Both organic and inorganic modifications of PHMS for coating applications are discussed in this article. Paints containing such polymers and fillers are being evaluated for corrosion resistance and high-temperature applications.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable