Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T15:32:20.916Z Has data issue: false hasContentIssue false

Molecularly Modified Alkoxide Precursors for Synthesis of Dielectric Ceramics.

Published online by Cambridge University Press:  28 February 2011

Pradeep P. Phule
Affiliation:
Department of Materials Science and Engineering, University of Pittsburgh, Pittsburgh, PA 15261, USA
Farida Khairulla
Affiliation:
Department of Materials Science and Engineering, University of Pittsburgh, Pittsburgh, PA 15261, USA
Get access

Abstract:

Chemical synthesis of titanate and zirconate based multicomponent electronic ceramics using molecularly modified alkoxide precursors is discussed. Controlled chemical polymerization of the modified alkoxides was conducted to prepare multicomponent gels which on calcination at moderate temperatures (700 – 1000°C) formed high purity, ultrafine powders (e.g. BaTiO3, ZrTiO4, LiTaO3). In the sol-precipitation technique modified precursors were used to prepare ultrafine (< 100 nm) and crystalline powders of such ceramics as BaTiO3 and BaZrO3 at low temperatures (< 100°C), under highly alkaline (pH > 13) conditions.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable