Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T14:48:51.978Z Has data issue: false hasContentIssue false

Nanocomposite TiC/a-C coatings: structure and properties

Published online by Cambridge University Press:  01 February 2011

Jeff Th. M. De Hosson
Affiliation:
Dept. of Applied Physics, Materials Science Centre and the Netherlands Institute for Metals Research, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands.
Yutao Pei
Affiliation:
Dept. of Applied Physics, Materials Science Centre and the Netherlands Institute for Metals Research, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands.
Damiano Galvan
Affiliation:
Dept. of Applied Physics, Materials Science Centre and the Netherlands Institute for Metals Research, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands.
Albano Cavaleiro
Affiliation:
Departamento de Engenharia Mecanica, FCTUC - Universidade de Coimbra Pinhal de Marrocos, 3030 Coimbra, Portugal
Get access

Abstract

This contribution deals with fundamental and applied concepts in nano-structured coatings, in particular focusing on the characterization with high-resolution (transmission) electron microscopy. Both unbalanced and balanced magnetron sputtering systems were used to deposit nc-TiC/a-C nanocomposite coatings with hydrogenated or hydrogen-free amorphous carbon (a-C) matrix, respectively. The contents of Ti and C in the coatings have been varied over a wide range (7∼45 at.% Ti) by changing the flow rate of acetylene gas or the locations of substrates relative to the center of C/TiC targets. Different levels of bias voltage and deposition pressure were used to control the nanostructure. The nanocomposite coatings exhibit hardness of 5∼35 GPa, hardness/E-modulus ratio up to 0.15, wear rate of 4.8×10−17 m3/Nm, coefficient of friction of 0.04 under dry sliding and strong self-lubrication effects. The nanostructure and elemental distribution in the coatings have been characterized with cross-sectional and planar high-resolution transmission electron microscopy (HRTEM) and energy filtered TEM. The influences of the volume fraction and size distribution of nano-crystallites TiC (nc-TiC) on the coating properties were examined.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable