Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T17:32:36.996Z Has data issue: false hasContentIssue false

Nanocrystalline BaTiO3 from the Gas-Condensation Process

Published online by Cambridge University Press:  10 February 2011

Shaoping Li
Affiliation:
Materials Science division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne IL 60439
J. A. Eastman
Affiliation:
Materials Science division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne IL 60439
L. J. Thompson
Affiliation:
Materials Science division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne IL 60439
Carl. Bjormander
Affiliation:
Materials Science division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne IL 60439
C. M. Foster
Affiliation:
Materials Science division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne IL 60439
Get access

Abstract

Nanocrystalline BaTiO3 can be prepared by the gas condensation method at a temperature as low as 700°C, with an average particle size as small as 18nm. The stoichiometry of nanocrystalline BaTiO3 particles can be controlled precisely and reproducibly. Nanocrystalline BaTiO3 powders, fabricated by a novel e-beam evaporation method, show good sintering behavior with a high density at a temperature as low as 1200°C. These samples exhibit a relatively larger dielectric constant than that of coarse-grained BaTiO3. In addition, a thermal analysis has been also carried out to determinethe lowest temperature for forming nanostructured BaTiO3 from Ba/Ti oxidized clusters at ambient pressure.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable