Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T20:08:40.298Z Has data issue: false hasContentIssue false

Nanosecond response organic photodiodes: From device physics towards biosensor applications

Published online by Cambridge University Press:  07 July 2011

S. Valouch
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
S. W. Kettlitz
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
N. Christ
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
S. Züfle
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
C. M. Ögün
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
M. Nintz
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
U. Lemmer
Affiliation:
Karlsruhe Institute of Technology, Light Technology Institute, Engesserstr. 13, 76131 Karlsruhe, Germany
Get access

Abstract

In this work we investigate polymer photodiodes based on a blend system consisting of poly(3-hexylthiophene-2,5-diyl) (P3HT) and the fullerene derivative (6,6)-phenyl C-butyric acid methyl ester (PCBM). An optimized low source impedance architecture allows measurements in the GHz range with minimum distortion, while at the same time allowing to probe the favourable sandwich device structure. We have studied the underlying device physics and investigated the influence of parameters such as active layer thickness and bias voltage on the transient photocurrent response. Using a numerical simulation software combining a self-consistent drift-diffusion model in conjunction with an optical model based on the transfer matrix method we model the transient photocurrent of polymer photodiodes. Transient photocurrent measurements utilizing this low impedance device architecture excited by 1.6 ns short laser pulses show very good correlation between simulated and measured results. Furthermore we have developed an encapsulation technique to integrate high-speed organic photodiodes onto standard printed circuit boards (PCBs) to avoid the degradation of the devices by humidity or oxygen.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable