Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T15:58:09.697Z Has data issue: false hasContentIssue false

New Magnetic Materials Produced By The Sol-Gel Process: A Possibility Of Producing Exotic Devices

Published online by Cambridge University Press:  28 February 2011

G. Kordas*
Affiliation:
Vanderbilt University, Nashville, TN 37235, USA.
Get access

Abstract

Ferromagnetic resonance (FMR) spectra of an iron-oxide thin film with a thickness of 70 A were recorded between 100 and 410 K at 9.5 GHz after heat treatment at about 500 °C in hydrogen atmosphere. The FMR-signal of this film consisted of two components (A and B) when the film plane was oriented parallel to the external fieTp The intensity of these components is not proportional toT3/2 in the range from 100 to 410 K. The line width of the A-component is determined by inhomogeneities in the magnetic structure. The line width of the B-component may be influenced by the spin-spin relaxation mechanism and skin effect. The temperature behavior of the resonance field of the A- and B-components was tentatively attributed to variation of the local fields with the temperature of measurements.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable