Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T15:31:29.620Z Has data issue: false hasContentIssue false

A New Way to Form Three-Dimensional Microstructures by Electrochemical Etching of Silicon

Published online by Cambridge University Press:  17 March 2011

P. Kleimann
Affiliation:
LENAC, Université Claude Bernard Lyon-I, 43 Bd. du 11 Novembre 1918, 69622 Villeurbanne, France
J. Linnros
Affiliation:
Department of Electronics, Kungl. Tekniska Högskolan, Electrum 229, S-164 40 Kista, SWEDEN
R. Juhasz
Affiliation:
Department of Electronics, Kungl. Tekniska Högskolan, Electrum 229, S-164 40 Kista, SWEDEN
Get access

Abstract

A new technique of bulk micromachining using anodic etching of (100)-oriented n-type silicon is presented. For particular conditions the transition regime between porous silicon formation and electropolishing enables the formation of high aspect ratio microtips which correspond to inverted macropore structures. This unusual property can be explained by the distortion of current lines near the basis of formed structures. The distortion, which prevents the tip dissolution, is due to the electrical field in the space charge region at the silicon-electrolyte interface. The same property can be used to form three-dimensional microstructures. The position and shape of the structures can be defined by forming steps of a few microns depth, prior tothe electrochemical etching. Then the etching parameters (HF concentration, light intensity, etching current density) are adjusted in order to electropolish the sample except where vertical walls are needed. This enables to form microstructures without a periodic pattern. The feasibility of this technique is demonstrated by forming 100μm wide pores, free-standing beams as well as high aspect ratio micro-needles and micro-tubes.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable