Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T04:29:14.330Z Has data issue: false hasContentIssue false

Non Alloyed Ohmic Contacts for GaAs Coplanar Mixer Diodes

Published online by Cambridge University Press:  15 February 2011

John M. Woodcock*
Affiliation:
Philips Research Laboratories, Redhill, Surrey RH1 5HA, England
Get access

Abstract

A Q-switched ruby laser has been used to anneal gallium arsenide which has either been implanted with a donor or coated with a thin layer of material containing the donor. Silicon nitride (∼500Å), germanium (∼50Å), tin (∼50Å) and silicon (∼500Å) have been used and in all cases laser annealing produces n-type doping levels in excess of 1019cm−3. Non alloyed ohmic contacts have been made on these heavily doped layers with specific contact resistances as low as 1.4 × 10−6Ω cm2. These contacts have been used in the fabrication of fine geometry coplanar mixer diodes. Ideality factors of 1.1 have been measured from the d.c. current voltage characteristics and diodes with a total capacitance of O.03pF have series resistances below 10 ohms. Matched pairs of these devices have given a 4.8dB conversion loss at 35GHz in a fin line balanced mixer.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable