Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T13:12:54.098Z Has data issue: false hasContentIssue false

Nondestructive Evaluation of Fatigue in Titanium Alloys

Published online by Cambridge University Press:  10 February 2011

H. Rösner
Affiliation:
Fraunhofer Institute Nondestructive Testing, Universität 37, 66123 Saarbrücken, Germany
N. Meyendorf
Affiliation:
Fraunhofer Institute Nondestructive Testing, Universität 37, 66123 Saarbrücken, Germany
S. Sathish
Affiliation:
Center for Materials Diagnostics, University of Dayton, Dayton OH 45469-0121
T.E. Matikas
Affiliation:
Former Director of the Center for Materials Diagnostics, University of Dayton
Get access

Abstract

Dissipated heat has been measured by thermographic technique during fatigue experiments on Ti-6AI-4V. Surface temperature of the specimen was found sensitive to the amount of fatigue damage accumulated in the material. An increased heat dissipation due to fatigue can be related to continuous change in the microstructure (increased dislocation density, stacking faults etc.) of the material. A method based on passive thermography can be proposed to monitor damage accumulation in Ti-6Al-4V due to cyclic loading.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable