Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T05:26:54.399Z Has data issue: false hasContentIssue false

Optimization of Annealing Conditions for ZnO-based Thin Films Grown Using MOCVD

Published online by Cambridge University Press:  10 September 2014

Anas Mazady
Affiliation:
Electrical and Computer Engineering, University of Connecticut, Storrs, CT 06269
Abdiel Rivera
Affiliation:
Electrical and Computer Engineering, University of Connecticut, Storrs, CT 06269
Mehdi Anwar*
Affiliation:
Electrical and Computer Engineering, University of Connecticut, Storrs, CT 06269
Get access

Abstract

In this work, effects of thermal annealing on the structural and optical properties of ZnO thin films grown on p-Si and GaN substrates using metalorganic chemical vapor deposition (MOCVD) are investigated. Annealing at 600 °C results in optimum crystal and optical qualities of the ZnO thin films on both substrates. Smaller lattice mismatch between grown ZnO epitaxial layer on GaN substrates results in better film morphology as compared to p-Si substrates. Higher annealing temperature along with a slower thermal ramp provides better crystal quality of ZnO thin films on both substrates. Annealing ZnO thin films at 700 °C with a slower thermal ramp results in better crystal quality as is evident from a 56% reduction in the full-width at half maximum (FWHM) of the (002) peak compared to the as-grown films. The optical quality also enhances with a slower annealing rate. The determination of the optimum annealing conditions for different substrates has important implications in fabricating optimized and efficient ZnO based electronics.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable