Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T00:52:19.121Z Has data issue: false hasContentIssue false

Optimization of Liquid Dynamic Compaction for Fe-Nd-B Magnet Alloys

Published online by Cambridge University Press:  25 February 2011

Mauri K. Veistinen
Affiliation:
Permanent address, Outokumpu Inc., Toolonkatu 4, P.O.Box 280, 00100 Helsinki, Finland
Y. Hara
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
E. J. Lavernia
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
R. C. O'Handley
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
N. J. Grant
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

Permanent magnets from the Fe77Nd15B8 alloy were produced using liquid dynamic compaction (LDC). Process parameters such as gas and metal mass flow rates were carefully controlled to refine the microstructure. Accordingly, grain sizes between 0.1 and 5 microns were achieved in the LDC compact. In contrast to our earlier LDC results high intrinsic coercivity in excess of 7500 Oe was obtained for thick (> 7 nm) as-LDC'd samples with lower neodymium content.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable