Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-19T01:08:55.944Z Has data issue: false hasContentIssue false

Optimum Integrated Heterodyne Photoreceiver for Coherent Lidar Applications

Published online by Cambridge University Press:  01 February 2011

Farzin Amzajerdian
Affiliation:
NASA Langley Research Center, Hampton VA 23681
Diego Pierrottet
Affiliation:
Coherent Applications, Inc., Hampton VA, 23669
Upendra Singh
Affiliation:
NASA Langley Research Center, Hampton VA 23681
Michael Kavaya
Affiliation:
NASA Langley Research Center, Hampton VA 23681
Get access

Abstract

Many coherent lidar applications, particularly airborne and space-based applications, impose stringent power and size constraints while requiring high levels of sensitivity. For this reason, optimization of the lidar heterodyne photoreceiver is one of the critical steps in ensuring full utilization of limited resources to achieve the required sensitivity. The analysis of 2-micron heterodyne receivers shows that substantial improvement of the order of 3 dB can be obtained by proper optimization of the receiver key control parameters and elimination of its parasitic capacitances by integrating the detector, its bias circuit, and the preamplifier on a single substrate. This paper describes analytical steps for defining optimum heterodyne receiver design parameters and development of experimental devices operating at 2-micron wavelength.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable