Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T14:56:49.653Z Has data issue: false hasContentIssue false

Oxygen Effect in Diamond Deposition at Low Temperatures

Published online by Cambridge University Press:  26 February 2011

Y. Liou
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
A. Inspektor
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
R. Weimer
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
D. Knight
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
R. Messier
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Diamond thin films were deposited on different substrates at low temperatures (lowest temperature∼ 300°C, estimated) in a microwave plasma enhanced chemical vapor deposition (MPCVD) system. The deposited films were amorphous carbon or diamond films depending on the different gas mixtures used. The growth rate of diamond thin films was decreased by adding oxygen to the gas mixture. The addition of oxygen to the gas mixtures was found to be important for diamond growth at low temperatures. Different concentrations of oxygen have been added into the gas mixture. Without oxygen, the deposited films were white soots and easily scratched off. Increasing the oxygen input improved the quality of the Raman peaks and increased the film transpancy. The diamond films were also characterized by scanning electron microscopy (SEM).

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable