Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T15:38:17.716Z Has data issue: false hasContentIssue false

Painterly Ceramics in Classical Athens and Renaissance Italy

Published online by Cambridge University Press:  28 February 2011

W. David Kingery*
Affiliation:
Department of Materials Science and Engineering and Department of Anthropology University of Arizona, Tucson, AZ 85721
Get access

Abstract

Fired clay vessels began to be produced in the Near East about 8,000 years ago; these vessels were utilitarian, undecorated, fired at a relatively low temperature and seem to have been derived from brick-making practices. By about 6,000 B.C., pottery making was a well developed craft and the use of slip coatings, ocher red and black decoration with control of oxidation-reduction during firing, impressed designs, rouletting, manganese oxide and spinel black pigments, coil and slab construction, burnishing, joining, paddle and anvil shaping, carving, trimming and preparing clays by decanting a suspension were widely known [1]. By the fifth millennium, these techniques had become quite sophisticated and were used to produce polychrome wares and glossy surfaces. Painted and glazed designs were confined to decorative motifs appropriate to a particular technique and culture.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable