Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-15T22:41:09.950Z Has data issue: false hasContentIssue false

Passivation of III-V Semiconductor Surfaces Using Light Assisted Integrated Processes

Published online by Cambridge University Press:  22 February 2011

Olivier Dulac
Affiliation:
FRANCE TELECOM, Centre National d'Etude des Té1écommunications, Paris B Laboratoire de Bagneux 196, Avenue Henri Ravera, BP 107, 92225 Bagneux Cedex, FRANCE
Yves I. Nissim
Affiliation:
FRANCE TELECOM, Centre National d'Etude des Té1écommunications, Paris B Laboratoire de Bagneux 196, Avenue Henri Ravera, BP 107, 92225 Bagneux Cedex, FRANCE
Get access

Abstract

Passivation of III-V semiconductor surfaces and especially the GaAs surface has been studied for over two decades without significant breakthrough. However, III-V device performances are still often limited by surface properties. In particular field effect behaviour in GaAs has been impossible to obtain due to the Fermi level pinning at the surface of this material. This paper presents an integrated sequence of low thermal budget processes to provide contamination control at the GaAs surface leading to very promising field effect on GaAs.

In-situ surface cleaning using a Distributed Electron Cyclotron Resonance Microwave plasma (DECR MMP) has been integrated with a thin dielectric film deposition facility using light assisted CVD technics. Photoluminescence results carried out on GaAs surfaces have demonstrated that exposure to a hydrogen plasma induces lower recombination rates on these surfaces. Bulk diffusion of hydrogen during this process can be controlled and eliminated using an integrated Rapid Thermal Annealing (RTA). Finally, in-situ encapsulation by a dielectric allows one to stabilize the electronic properties of the surface for passivation applications. A silicon nitride film deposited by a direct UV photolysis deposition process has been developed for this study and is presented here.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable