Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T12:50:07.980Z Has data issue: false hasContentIssue false

Patterning of GaN in High-Density Cl2- and BCl3-Based Plasmas

Published online by Cambridge University Press:  10 February 2011

R. J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185–0603, rjshul@sandia.gov
R. D. Briggs
Affiliation:
Sandia National Laboratories, Albuquerque, NM 87185–0603, rjshul@sandia.gov
J. Han
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
S. J. Pearton
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
J. W. Lee
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
C. B. Vartuli
Affiliation:
University of Florida, Department of Materials Science and Engineering, Gainesville, FL 32611
K. P. Killeen
Affiliation:
Hewlett-Packard Laboratories, Palo Alto, CA 94304
M. J. Ludowise
Affiliation:
Hewlett-Packard Laboratories, Palo Alto, CA 94304
Get access

Abstract

Fabrication of group-Ill nitride electronic and photonic devices relies heavily on the ability to pattern features with anisotropie profiles, smooth surface morphologies, etch rates often exceeding 0.5 μm/min, and a low degree of plasma-induced damage. Patterning these materials has been especially difficult due to their high bond energies and their relatively inert chemical nature as compared to other compound semiconductors. However, high-density plasma etching has been an effective patterning technique due to ion fluxes which are 2 to 4 orders of magnitude higher than conventional RIE systems. GaN etch rates as high as -1.3 μm/min have been reported in ECR generated ICI plasmas at -150 V dc-bias. In this study, we report high-density GaN etch results for ECR- and ICP-generated plasmas as a function of Cl2- and BCl3-based plasma chemistries.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable