Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T10:58:19.834Z Has data issue: false hasContentIssue false

Pentacene Transistors with Polymer Gate Dielectrics on Metallized Optical Fibers

Published online by Cambridge University Press:  01 February 2011

Jimmy Granstrom
Affiliation:
Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey, 07974
Howard E. Katz
Affiliation:
Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey, 07974
Get access

Abstract

It is difficult to deposit a very thin polymer layer onto a fiber-shaped substrate from solution because the high interfacial energy can lead to dewetting. This difficulty presents itself when attempting to apply a gate dielectric to conductive fiber substrates during the fabrication of fiber transistors for use in applications such as “electrotextiles” and optical switches. We present a dip coating process that applies a gate dielectric to metal-coated optical fibers with high uniformity and reproducibility, resulting in pentacene field-effect transistors (FETs) with excellent transistor characteristics including mobilities up to 0.4 cm2/Vs and on/off ratios up to 7000. In one case, a memory effect was demonstrated. Several gate dielectrics were successfully applied to the optical fibers, suggesting a baseline set of suitable materials for this purpose. A thorough study of the dip coating conditions is presented, including proposed explanations of the effects of different coating procedures and solution physical properties.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable