Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T01:32:42.271Z Has data issue: false hasContentIssue false

Permeability and Structure of Resorcinol – Formaldehyde Gels

Published online by Cambridge University Press:  10 February 2011

G. W. Scherer
Affiliation:
Dept. CEOR, Princeton University, Eng. Quad. E-319, Princeton, NJ 08544 USA scherer@princeton.edu
C. Alviso
Affiliation:
Lawrence Livermore National Lab., P.O. Box 808 L-322, Livermore CA 94550 USA
R. Pekala
Affiliation:
Lawrence Livermore National Lab., P.O. Box 808 L-322, Livermore CA 94550 USA
J. Gross
Affiliation:
Lawrence Livermore National Lab., P.O. Box 808 L-322, Livermore CA 94550 USA
Get access

Abstract

The permeability (D) of resorcinol-formaldehyde (RF) gels was measured using a beam-bending technique. For gels made at various solids contents and with different catalyst contents, the permeabilities ranged over a factor of ∼50; the pore radii inferred from D varied from ∼3 to 30 nm. Pore radii obtained on RF aerogels using nitrogen desorption were severely affected by compression of the aerogel by capillary forces (resulting from the surface tension of liquid nitrogen). After correction for that effect, the desorption data were found to be in very good agreement with the pore sizes calculated from D.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable