Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T18:28:24.994Z Has data issue: false hasContentIssue false

Permeability Changes in Crystalline Rocks Due to Temperature: Effects of Mineral Assemblage

Published online by Cambridge University Press:  26 February 2011

C. A. Morrow
Affiliation:
U.S. Geological Survey, 345 Middlefield Road, MS/977, Menlo Park, CA 94025
D. E. Moore
Affiliation:
U.S. Geological Survey, 345 Middlefield Road, MS/977, Menlo Park, CA 94025
J. D. Byerlee
Affiliation:
U.S. Geological Survey, 345 Middlefield Road, MS/977, Menlo Park, CA 94025
Get access

Abstract

The change in permeability with time of granite, quartzite, anorthosite and gabbro was measured while these rocks were subjected to a temperature gradient. The highest temperature (at the heat source) was fixed at 250°C, while low temperatures ranged from 60 to 111°C, depending on rock type. Permeability reductions of up to two orders of magnitude were observed, with the greatest reactions occurring in the quartzite. These changes are thought to be caused by dissolution of minerals at high temperatures, and redeposition of the dissolved material at lower temperatures. Quartz appears to be an important mineral in this self-sealing process. If very low permeability is desired around a nuclear waste repository in crystalline rocks, then a quartz-rich rock may be the most appropriate host.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable