Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T10:57:39.965Z Has data issue: false hasContentIssue false

A Phenomenological Approach to the Ductility in Ultra-Fine Grain,Rapidly Solidified Materials

Published online by Cambridge University Press:  15 February 2011

M. A. Otooni*
Affiliation:
US Army Armament Research, Development and Engineering Center, Picatinny Arsenal, NJ 07806-5000
Get access

Abstract

Crystallization in amorphous materials produces polycrystalline materials with fine grains which can be on the order of 1–2 microns, depending on the extent of annealing. Ductility in these materials with this range of grain sizes is generally low. This paper deals primarily with the lack of ductility in these classes of materials and will present a quasi-mathematical approach to this phenomenon. It will be shown that the influence of the plastic zone, the dislocation-free zone, and the grain size can be expressed by a unique formalism from which the propagation of cracks, and the lack of ductility, can be readily predicted. These deductions will become evident from the results of recent simulation experiments which will provide evidence to support the most essential elements of the approach presented in this paper.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable