Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T03:25:40.255Z Has data issue: false hasContentIssue false

Phosphorous Doping of Microcrystalline CVD Diamond Using Modified Conditions

Published online by Cambridge University Press:  01 February 2011

Ken Haenen
Affiliation:
ken.haenen@uhasselt.be, Hasselt University, Institute for Materials Research (IMO), Wetenschapspark 1, Diepenbeek, B-3590, Belgium, +32-(0)11-268875, +32-(0)11-268899
Andrada Lazea
Affiliation:
andrada.lazea@uhasselt.be, IMEC vzw, Division IMOMEC, Diepenbeek, Belgium
Vincent Mortet
Affiliation:
vincent.mortet@uhasselt.be, Hasselt University, Institute for Materials Research (IMO), Diepenbeek, Belgium
Jan D'Haen
Affiliation:
jan.dhaen@uhasselt.be, Hasselt University, Institute for Materials Research (IMO), Diepenbeek, Belgium
Peter Geithner
Affiliation:
peter.geithner@physik.uni-erlangen.de, Friedrich-Alexander Universität Erlangen-Nürnberg, Technische Physik, Erlangen, Germany
Jürgen Ristein
Affiliation:
juergen.ristein@physik.uni-erlangen.de, Friedrich-Alexander Universität Erlangen-Nürnberg, Technische Physik, Erlangen, Germany
Get access

Abstract

Phosphorous-doping of predominantly (110) oriented polycrystalline CVD diamond films is presented. Incorporation of phosphorous into the diamond grains was accomplished by using novel microwave plasma enhanced chemical vapor deposition (MW PE CVD) growth conditions. The substitutional nature of the phosphorous atom was confirmed by applying the quasi-steady-state photocurrent technique (PC) and cathodoluminescence (CL) measurements at low temperature. Topographical information and the relation between substrate and P-doped film grain orientation was obtained with scanning electron microscopy (SEM) and electron back-scattered diffraction (EBSD). The optimized growth parameters for P-doped layers on (110) oriented polycrystalline diamond differ substantially from the standard conditions reported in literature for P-doping of single crystalline (111) and (100) oriented diamond surfaces.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable