Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T18:32:30.125Z Has data issue: false hasContentIssue false

Plasma Etching Characteristics of Sputtered Tungsten Films

Published online by Cambridge University Press:  25 February 2011

S. Franssila
Affiliation:
Semiconductor Laboratory, VTT, Olarlnluoma 9, SF-02200 Espoo, Finland
J. M. Molarius
Affiliation:
Semiconductor Laboratory, VTT, Olarlnluoma 9, SF-02200 Espoo, Finland
J. Saarilahti
Affiliation:
Semiconductor Laboratory, VTT, Olarlnluoma 9, SF-02200 Espoo, Finland
Get access

Abstract

The relationship between microstructure of tungsten thin films and plasma etching properties has been studied. Rutherford backscattering, nuclear reaction analysis 16O(α,α)16O, X-ray diffraction, and resistivity measurements have been used to characterize the sputter deposited films. Independent of deposition pressure, the films were all high density, low oxygen (<1 at%), low resistivity and bccot-phase. Etch rate differences of 40% were measured in pure SF6, whereas only 10% differences were seen in SF6/Cl2 and SF6/O2BCi3 plasmas. Intentional oxygen doping (up to 2 at-%) increases the etch rate in pure SF6 plasma by 75%, wherasthe etch rate in SF6/O2/BCl3 plasma only increases 25%. The role of film density (porosity) and oxygen incorporation on etching mechanism are discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable