Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T05:48:42.085Z Has data issue: false hasContentIssue false

Plastic Relaxation in Thin Copper Films

Published online by Cambridge University Press:  21 March 2011

Jonathan B. Shu
Affiliation:
Department of Materials Science and Engineering, Cornell University Bard Hall, Ithaca, NY 14853-1501
Shefford P. Baker
Affiliation:
Department of Materials Science and Engineering, Cornell University Bard Hall, Ithaca, NY 14853-1501
Get access

Abstract

We have studied the isothermal relaxation behavior of 500 nm Cu films with SiNx passivation and barrier layers on Si substrates. Oxygen content in the Cu films was varied by deposition in various oxygen partial pressures in the range 10-10 to 10-4 Torr. The substrate curvature method was used to investigate the thermomechanical behavior of the Cu films. Isothermal relaxation experiments were performed in the temperature range 50-175°C. Comparison with constitutive creep deformation equations shows that the relaxation data in this temperature range are well described by power law behavior. Under certain isothermal conditions related to temperature, stress, and thermal history, anelastic recovery was observed– i.e. while in a tensile stress state and with the temperature held constant, the overall film stress was seen to increase over a relatively short time scale.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable