Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T10:25:24.802Z Has data issue: false hasContentIssue false

Polycrystalline and Amorphous Chromium Oxide MOCVD

Published online by Cambridge University Press:  17 March 2011

Yuneng Chang
Affiliation:
Lunghwa Institute of Technology, Dept. of Chemical Engineering, 300 Sec.1, Wan show Road, Guayshan, Taoyuan, Taiwan 333, R.O.C.
Shengfu Huang
Affiliation:
Lunghwa Institute of Technology, Dept. of Chemical Engineering, 300 Sec.1, Wan show Road, Guayshan, Taoyuan, Taiwan 333, R.O.C.
Minche Huang
Affiliation:
Lunghwa Institute of Technology, Dept. of Chemical Engineering, 300 Sec.1, Wan show Road, Guayshan, Taoyuan, Taiwan 333, R.O.C.
Get access

Abstract

This paper will report the methods to deposit polycrystalline or amorphous chromium oxide (Cr2O3) thin films, which have potential applications in optoelectronics such as components for flat panel display devices. An atmospheric cold wall chemical vapor deposition (CVD) system was used to thermally decompose sublimed chromium acetylacetonate(Cr(C5H7O2)3) precursor, which gave Cr2O3 films. Oxygen concentration in gas phase is the key factor determining chromia film structure. In oxygen containing CVD system, the deposited films were polycrystalline Cr2O3, with (006), and (110) orientations. In inert, O2 free environment, the grown films were amorphous chromium oxide, as identified by XPS and XRD results. Based on depth profiling AES results, even in an oxygen free ambient, the elemental Cr/O ratio in films still remained stoichiometry(Cr:O = 2:3). Oxygen atoms might originate from acetylacetonyl (C5H7O2) ligands in the Cr(C5H7O2)3precursor.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable