Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T06:39:28.718Z Has data issue: false hasContentIssue false

Polycrystalline Diamond Film Resistors

Published online by Cambridge University Press:  25 February 2011

L. M. Edwards
Affiliation:
Department of Electrical Engineering, Vanderbilt University, Nashville, TN
J. L. Davidson
Affiliation:
Department of Electrical Engineering, Vanderbilt University, Nashville, TN
Get access

Abstract

The technology to fabricate polycrystalline diamond film resistors has been initiated using modified thick film patterning techniques and in situ solid source doping.

Doping of polycrystalline diamond films in microwave plasma CVD systems has been achieved historically through use of diborane gas, which may contaminate the deposition system causing all diamond films thereafter to be doped p-type. We have attempted noncontaminating in situ doping utilizing two solid source dopants, and have met with preliminary success.

The more effective source (B2O3) produces a fairly even dopant concentration across the substrate, with sheet resistances ranging from 800 ohms per square to 4500 ohms per square. The other source (BN) showed significant doping in a narrow band surrounding the source, but the doping concentration decreased rapidly with distance from the source. Films grown afterwards with no doping were evaluated through resistance measurements; no evidence of doping contamination was observed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable