Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T05:21:45.918Z Has data issue: false hasContentIssue false

Polyoxometallate Containing Polymeric Materials for Nanolithography and Molecular Devices

Published online by Cambridge University Press:  15 March 2011

N. Glezos
Affiliation:
Institute of Microelectronics, NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
P. Argitis
Affiliation:
Institute of Microelectronics, NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
D. Velessiotis
Affiliation:
Institute of Microelectronics, NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
P. Koutsolelos
Affiliation:
Institute of Microelectronics, NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
C.D. Diakoumakos
Affiliation:
Institute of Microelectronics, NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
A. Tserepi
Affiliation:
Institute of Microelectronics, NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
K. Beltsios
Affiliation:
Institute of Physical Chemistry NCSR “Demokritos”, 15310, Aghia Paraskevi, GREECE
Get access

Abstract

In this paper, molecular compounds that come from the class of tungsten or molybdenum polyoxometallates (POM) are examined as components of polymeric materials with potential use in nanolithography and molecular devices. In the past, POMs have been used as components of DUV resists with promising results, but the metallic compound presence and their unconventional processing demands discouraged their further use in microlithography. In this paper routes for the use of these compounds in e-beam nanolithography are investigated. Different resist formulations, where poly (vinyl alcohol) and poly (methyl methacrylate) are used as host polymers, will be discussed along with the related process issues.

First results from the use of polyoxometallate compounds as active elements, or components, of molecular electronic nanodevices will be also presented. The electronic transport properties of the composite materials have been tested using planar devices with contact distances of 40μm, 5μm, 50nm and 25nm. Contacts were fabricated using electron beam lithography and a lift–off process. Even at room temperature conditions conductivity peaks appear in the case of distances smaller than 25nm. These peaks are related to the energy distance of the HOMO – LUMO levels of the active molecules and the work function of the electrode used. The position and the size of the peaks depend upon the mean distance of the molecules as well as the electrode distance. On the other hand when the contact is illuminated, conductivity increases even by two orders of magnitude. This is attributed to the photon excitation of electrons from the HOMO.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable