Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T08:27:26.990Z Has data issue: false hasContentIssue false

Pore Morphology Study of Silica Aerogels

Published online by Cambridge University Press:  21 February 2011

D.W. Hua
Affiliation:
UNM/NSF Center for Micro-Engineered Ceramics, Albuquerque, NM.
J. Anderson
Affiliation:
UNM/NSF Center for Micro-Engineered Ceramics, Albuquerque, NM.
S. Hæreid
Affiliation:
UNM/NSF Center for Micro-Engineered Ceramics, Albuquerque, NM.
D.M. Smith
Affiliation:
UNM/NSF Center for Micro-Engineered Ceramics, Albuquerque, NM.
G. Beaucage
Affiliation:
Sandia National Laboratories, Albuquerque, NM.
Get access

Abstract

Silica aerogels have numerous properties which suggest applications such asultra high efficiency thermal insulation. These properties relate directlyto the aerogel's pore size distribution. The micro and meso pore size rangescan be investigated by normal small angle x-ray scattering and possibly,nitrogen adsorption. However, the measurement of larger pores (> 250 Å)is more difficult. Due to their limited mechanical strength, mercuryporosimetry and nitrogen condensation can disrupt the gel structure andelectron microscopy provides only limited large scale structure information.The use of small angle light scattering techniques seems to have promise,the only hurdle is that aerogels exhibit significant multiple scattering.This can be avoided if one observes the gels in the wet stage since thestructure of the aerogel should be very similar to the wet gel (as theresult of supercritical drying). Thus, if one can match the refractiveindex, the morphology can be probed. The combination of certain alcoholicsolvents fit this index matching criteria. Preliminary results for the gelnetwork (micron range) and primary particle structure (nanometer) arereported by using small angle light scattering and ultra-small angle x-rayscattering. The effects on structure over the length scale range of <1 nmto >5 μπι under different conditions (precursors, pH, etc.) arepresented. The change in structure of an aerogel during isostatic compactionto 228 MPa (to simulate drying from wetting solvents) are alsodiscussed.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable