Hostname: page-component-7b7567c8c-jswmv Total loading time: 0 Render date: 2026-11-15T09:33:20.970Z Has data issue: false hasContentIssue false
  • English
  • Français

Potential of Monolithic Reactors in Catalysis; Multiphase Applications

Published online by Cambridge University Press:  15 February 2011

Jacob A. Moulijn and
Freek Kapteijn
Jacob A. Moulijn
Affiliation:
Industrial Catalysis, Delft University of Technology, Julianalaan 136, 2628 BL Delft, The Netherlands
Freek Kapteijn
Affiliation:
Industrial Catalysis, Delft University of Technology, Julianalaan 136, 2628 BL Delft, The Netherlands
Get access

Abstract

Several aspects of the application of monolithic catalysts in multiphase reactions are highlighted: why, hydrodynamics and preparation. A bright future for monolithic systems in this area is predicted for application in chemical industry.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 549: Symposium FF – Advanced Catalytic Materials - 1998 , 1998, 3
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Structured catalysts and reactors edited by Moulijn, J. A. and Cybulski, A., Chemical Industries series. Vol. 71, Marcel Dekker, New York, ISBN 0-8247-9921-6 (1998).Google Scholar
2. Lebens, P. J. M., Edvinsson, R. K., Sie, S. T., and Moulijn, J. A.. The effect of entrance and exit geometry on pressure drop and flooding limits in a single channel of an internally finned monolith, Ind.Eng.Chem.Res. 37, 3722–3730 (1998).Google Scholar
3. Lebens, P. J. M., van der Meijden, R., Edvinsson, R. K., Kapteijn, F., Sie, S. T., and Moulijn, J. A.. Hydrodynamics of gas-liquid countercurrent flow in internally finned monolithic structures. Chem.Engng.Sci. 52, 3893–3899 (1997).Google Scholar
4. Jansen, J. C., Koegler, J.H., van Bekkum, H., Calis, H. P., van den Bleek, C. M., Kapteijn, F., Moulijn, J. A., Geus, E. R., and van der Puil, N.. Zeolitic coatings and their potential use in catalysis. Microporous and Mesoporous Materials 21, 213–226 (1998).Google Scholar
5. Richard, D. and Gallezot, P., Preparation of highly dispersed carbon supported platinum catalysts, In: Preparation of catalysts IV, edited by Delmon, B., Grange, P., Jacobs, P. A. and Poncelet, G., Stud. Surf. Sci. Catal., 31, Elsevier, Amsterdam, pp. 71–79 (1989).Google Scholar
6. Vergunst, Th., Kapteijn, F., and Moulijn, J. A.. Carbon coating of ceramic monolithic substrates. In: Preparation of catalysts VII, edited by Delmon, B., Jacobs, P. A., Maggi, R., Martens, J. A., Grange, P., and Poncelet, G., Stud. Surf. Sci. Catal., 118, Elsevier, Amsterdam, pp. 175–184 (1998).Google Scholar
7. Vergunst, Th., Preparation of monolithic catalysts, Ph.D. Thesis, Delft University of Technology, Delft, The Netherlands (1999).Google Scholar