Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T06:10:45.265Z Has data issue: false hasContentIssue false

Powder Metallurgy Processing of Intermetallic Matrix Composites

Published online by Cambridge University Press:  15 February 2011

Randall M. German
Affiliation:
P/M Lab, 118 Research West, Engineering Science and Mechanics Department The Pennsylvania State University, University Park, PA 16802–6809
Ronald G. Iacocca
Affiliation:
P/M Lab, 118 Research West, Engineering Science and Mechanics Department The Pennsylvania State University, University Park, PA 16802–6809
Get access

Abstract

Intermetallic compounds are similar to ceramics because they are stoichiometric, with limited compositional ranges and brittle behavior. The limited ductility forces a reliance on powder techniques for shaping and consolidation. The high temperature character of intermetallics is beneficial to high temperature service, but this same attribute contributes to difficulty in processing. This paper reviews the several powder approaches to forming intermetallic structures. Examples are given on powders, consolidation options, and properties. Densification maps are introduced for estimation of consolidation cycles. Unfortunately, many of the composites exhibit little strengthening benefit from incorporation of reinforcing phases.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable