Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T06:32:18.622Z Has data issue: false hasContentIssue false

Powder Processing of Fe3Al-Based Iron-Aluminide Alloys

Published online by Cambridge University Press:  26 February 2011

V.K. Sikka
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831
R.H. Baldwin
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831
J.H. Reinshagen
Affiliation:
Ametek, Eighty Four, PA 15330
J.R. Knibloe
Affiliation:
EG&G Idaho, P.O. Box 1625, Idaho Falls, ID 83415
R.N. Wright
Affiliation:
EG&G Idaho, P.O. Box 1625, Idaho Falls, ID 83415
Get access

Abstract

The production, characterization, and consolidation of Fe3Al-based iron-aluminide powders are described. The consolidated powders were fabricated into sheet. The sheet was tensile tested from room temperature to 800°C and creep tested in the temperature range of 450 to 704°C. Mechanical properties were compared for nitrogen and argon atomized powders. Mechanical properties were also compared for argon atomized powders of Fe3Al alloys containing 2 and 5% Cr.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable